MOS2 Coating

MOS2 Coating

MOS2 Coating

Molybdenum Disulfide Coating

Molybdenum disulfide is an inorganic compound composed of molybdenum and sulfur. Their application can be seen in load carrying capacity, operating temperature. The process uses the transfer of lubricant between the two surfaces. Its properties are also best used as a dry film lubricant.

Properties of MOS2 Coatings

Moly coatings are used by making a combination of Molybdenum Disulphide and a few other resins. They are cured thermally and then attached to the base of the metal. Further used as a solid film lubricant in industrial uses. These include grease, paints and other lubricants (grease based). Also known as MOS2, the lubricant undergoes a wide range of temperature and pressures. Its lattice layer molecular structure helps in creating the bond with the metal structure.

Request a Quote

    Magnetron Sputtering

    There are 2 famous ways of using this coating process.

    • Burnishing/ Rubbing – The use of molybdenum in its powder form is preferred to create the lubricating effect on the surface. Further, the powder is applied to the metal structure using a soft fabric pad. There are individual applicators for coatings like these. Keep a few things in check while the process is done. For instance, the powder should not spread anywhere apart from your metal surface. An aluminium oxide blast is recommended for this process.

    • PVD- The introduction of PVD in the metal cutting industry is one of the breakthroughs the world has seen. Industrially it has wide popularity in usages like Automotives, aerospace and what not. From Decorative coatings to low friction coating it serves a multipurpose use. The process used is a vacuum coating technique which layers a thin surface to any metal surface. Even the self -cleaning windows are an essential application of this technology

    You Make It First, We Make It Last!

      Why Advanced Coating Technologies

      • PVD and DLC Coating Capabilities

      • Extensive Material and Coating Testing

      • Industry-Leading Research and Development Team

      • Ph. D. Scientist on staff

      • ISO 9001 & AS9100 Certified

      • Enhanced Quality Control & Quick Turnaround

      Our experience and technology in PVD and DLC as well as other coating applications can help to deliver an even and consistent surface that provides many advantages to your cutting tools.